Smart-Lift SL-150

The SL-150 SMART-LIFT™ assures a pleasing installation for homes and corporate offices by its exceptionally smooth and quiet movement. Designed to fit most installation requirements, the SL-150 needs only eleven inches of ceiling clearance, easily accommodates multiple control options, and is plenum rated. We understand the complexity of lift installations and have a helpful technical staff available to assist with questions.

• Plenum rated
• Low profile – 11" overall height
• 8 1/4" of travel distance
• Low voltage controlled
• Suitable for push-up table top installation
• Projector Roll, Pitch and Yaw
• Fore/aft, left/right projector positioning
• Vertical projector cradle adjustment
• Quick projector disconnect/reconnect
• Three mounting methods
• Two internal outlets, one is switched on 110V units
• Used with finished or suspended ceiling
• Horizontal and vertical cradle positioning
• All electrical components are UL, CSA and VDE listed

Specifications

Specifications common to SMART-LIFT SL-150:

Downward Travel: 8 1/4" / 209.55mm

Minimum Clearance Above Ceiling: 11 inches

Overall Dimension (Up Position - H x W x D): 11" x 22 1.8" x 26 1.8" or 279.4mm x 562mm x 664mm

Maximum Projector Size (HxWxL): 9.5 x 18 x 22.25 inches

Ceiling Opening (WxD): 22" x 25 3.4" (+3/8", -0") or 558.8mm x 654.1mm

Ceiling Closure Panel (WxD): 19 5.8" x 23 3/8" or 498.6mm x 593.8mm

Voltage: 120V or 230V

Low Voltage: Will accept 5 – 30V AC/DC for triggering commands

Current Draw: 0.9 Amps continuous

Net Weight: 66 lbs. or 29.7 kg

Lift Capacity: 35 lbs.

Projector Adjustment Features:
Roll ± 2 degrees
Pitch ± 12 degrees
Yaw ± 5 degrees
Horizontal and vertical cradle positioning

Three Mounting Methods:
1. Three 3/8" Threaded Rods. Three point mounting for easier leveling.
2. 1 1/2" Extension Column with SMA-600. Provides 1 1/2" horizontal adjustment.
3. Side mounting using the built in joist tabs. Allows installation directly into wood framed ceilings.

Ordering Steps common to SMART-LIFT SL-150:

Determine if 8 1/4" of travel is appropriate for your application.

Verify you have a minimum 11" of ceiling clearance.

Verify that the dimensions of the projector fit into the Maximum Projector Size dimension listed in the Specifications. If your projector is close to the maximum size, call sales at 1.800.329.6506 option 2 to verify your projector will fit properly.

The SL-150 SMART-LIFT™ comes ready for a finished ceiling installation. Determine if you
will need the optional Suspended Ceiling Finishing Kit (CMA-240) accessory.

Determine if you will need a control accessory such as Radio Frequency Remote Control
(RC-10) or Infrared Remote Control (IR-10).

Links to Downloads
Catalog Page
Technical Drawing
CAD Drawing
Installation Instructions

SLB interface bracket must be ordered separate. Please give us a call for assistance in selecting your bracket at 800-329-6506 option 2