|
Tensioned
With its stylish curved aluminum extruded case available in either black, white or graphite finish, the Tensioned Contour Electrol is a beautiful addition to any installation.
An optional choice of seven veneer finishes are also available for the front cover of the screen case for a warm, elegant look.
Veneers from left to right (top row) Honey Maple, Medium Oak, Heritage Walnut, Mahogany, (bottom row) Light Oak, Natural Walnut, Cherry.
Screen surface retracts completely into the case for a clean, modern appearance when screen is not in use.
For easy installation, the Tensioned Contour Electrol is available with SCB-100 or SCB-200 (RS-232 serial control board), Low Voltage Control unit, Silent Motor, Silent Motor with Low Voltage Control unit or a Video Projector Interface built into the case.
Front projection surfaces standard with black backing for opacity.
Standard with a Decora style three position wall switch.
All fabrics listed below will be seamless.
Downloads
Brochure
Surface Type |
Da-Mat (No Gain - Low Light Conditions Moderate Lumens)
A smooth, white, vinyl finish surface for precise image reproduction. Provides an exceptionally wide angle of view with little loss of resolution. It is a highly flexible unsupported vinyl fabric and may be folded or rolled.
Viewing Angle: 50 Degrees
Gain: 1.0 |
High Contrast Da-Mat (Negative Gain High Lumens Projectors)
A smooth, gray, vinyl finish surface for high output (1500 Lumnes and above) LCD and DLP projectors. This surface improves the perceived contrast by lowering black levels. It is a flexible unsupported vinyl fabric and may be folded or rolled.
Viewing Angle: 40 Degrees
Gain: .08
|
Cinema Vision (Moderate Gain - Moderate or Low Light Conditions)
A smooth, light gray, vinyl finish surface for moderate output (750 to 1300 Lumens) LCD and DLP projectors. This surface improves the perceived contrast by lowering black levels while offering moderate gain. It is a flexible unsupported vinyl fabric and may be folded or rolled.
Viewing Angle: 45 Degrees
Gain: 1.3 |
High Contrast Cinema Vision(Low Gain Gray Surface - Low Light/Contrast Projectors)
A smooth, gray, vinyl finish surface for moderate output for LCD and DLP projectors. This surface improves the perceived contrast by lowering black levels while offering low gain. It is a flexible unsupported vinyl fabric and may be folded or rolled.
Viewing Angle: 45 Degrees
Gain: 1.1 |
Pearlescent (Moderate Gain - Moderate Light Conditions)
This surface utilizes an unsupported vinyl creating a very smooth Pearlescent coating that provides high reflectivity and brilliance without loss of image quality or resolution.
Viewing Angle: 35 Degrees
Gain: 1.5
|
High Power (High Gain - High Light Conditions)
A technological breakthrough, combines the reflectivity of a glass beaded surface with the ability to clean the surface when required. Its smooth surface offers the highest gain of all types of screen surfaces with moderate viewing angle. Screen surface can be cleaned with mild soap and water. Flame retardant and mildew resistant.
Viewing Angle: 25 Degrees
Gain: 2.8
|
Da-Tex (Moderate to High Gain-Best Surface for Rear Projection for Low to Moderate Lumens)
A translucent, neutral gray vinyl surface that offers high transmission and low reflectance values for optimal viewing. It yields excellent color rendition, image contrast and a wide viewing angle. Suitable for all types of rear projection.
Viewing Angle: 30 Degrees
Gain: 1.8
|
Dual Vision (No Gain - High Lumens Projector)
A unity gain flexible projection fabric capable of both front and rear projection. The surface is ideal for video projection under controlled light conditions. With an exceptionally wide viewing cone, each seat in the audience will observe a uniform, bright, sharp image with no color shift. Surface needs to be tensioned. Screen surface can be cleaned with mild soap and water.
Viewing Angle: 50 Degrees
Gain: 1.0
|
Audio Vision (No Gain - Low Light Conditions Moderate Lumens)
This acoustically transparent front projection screen allows for the center channel speaker to be placed directly behind the screen while still transmitting the full range and brillianceof an original soundtrack with maximum clarity.
Viewing Angle: 50 Degrees
Gain: 1.0
|
High Contrast Audio Vision (Low Gain Gray Surface - Low Light/Contrast Projectors)
With the same optical characteristics as the High Contrast Da-Mat material, this surface is designed to provide the viewer with a more realistic soundstage by placing speakers behind the screen and allowing the sound to be transmitted through the material. This screen surface is best used when there is good control of ambient lighting and a moderately wide viewing angle is desired.
Viewing Angle: 45 Degrees
Gain: .08 |
|
